6TB Gripbelt Sheaves with Split Taper Bushings

Size Bushing Type Pitch Diameter (4L/A) Pitch Diameter (5L/B) Outside Diameter Type (O.L.) (L) (P) (C) (H) (F) (G) (X) (E) Pulley Weight (LBS)
6TB34 P2 3.0″ 3.4″ 3.75″ 3 6-1/16″ 2-15/16″ 1-1/16″ 2-7/8″ 3″ 4-3/4″ 5/8″ 2-5/16″ 1/4″ 6.1
6TB36 P2 3.2″ 3.6″ 3.95″ 3 6-1/16″ 2-15/16″ 1-1/16″ 2-7/8″ 3″ 4-3/4″ 5/8″ 2-5/16″ 1/4″ 7.3
6TB38 P2 3.4″ 3.8″ 4.15″ 5 5-5/8″ 2-15/16″ 5/8″ 2-7/16″ 3″ 4-3/4″ 2-5/16″ 1/4″ 7.0
6TB40 P2 3.6″ 4.0″ 4.35″ 5 5-5/8″ 2-15/16″ 5/8″ 2-7/16″ 3″ 4-3/4″ 2-5/16″ 1/4″ 8.1
6TB42 P2 3.8″ 4.2″ 4.55″ 5 5-5/8″ 2-15/16″ 5/8″ 2-7/16″ 3″ 4-3/4″ 2-5/16″ 1/4″ 9.3
6TB44 P2 4.0″ 4.4″ 4.75″ 13 5″ 2-15/16″ 0 1-13/16″ 3″ 4-3/4″ 5/8″ 2-5/16″ 1/4″ 9.9
6TB46 P2 4.2″ 4.6″ 4.95″ 13 5″ 2-15/16″ 0 1-13/16″ 3″ 4-3/4″ 5/8″ 2-5/16″ 1/4″ 11.0
6TB48 P2 4.4″ 4.8″ 5.15″ 13 5″ 2-15/16″ 0 1-13/16″ 3″ 4-3/4″ 5/8″ 2-5/16″ 1/4″ 11.8
6TB50 P2 4.6″ 5.0″ 5.35″ 13 5″ 2-15/16″ 0 1-13/16″ 3″ 4-3/4″ 5/8″ 2-5/16″ 1/4″ 12.9
6TB52 P2 4.8″ 5.2″ 5.55″ 13 5″ 2-15/16″ 0 1-13/16″ 3″ 4-3/4″ 5/8″ 2-5/16″ 1/4″ 14.8
6TB54 Q1 5.0″ 5.4″ 5.75″ 13 5-1/32″ 2-1/2″ 0 2-1/4″ 4-1/8″ 4-3/4″ 3/4″ 1-3/4″ 9/32″ 11.8
6TB56 Q1 5.2″ 5.6″ 5.95″ 13 5-1/32″ 2-1/2″ 0 2-1/4″ 4-1/8″ 4-3/4″ 3/4″ 1-3/4″ 9/32″ 17.3
6TB58 Q1 5.4″ 5.8″ 6.15″ 13 5-1/32″ 2-1/2″ 0 2-1/4″ 4-1/8″ 4-3/4″ 3/4″ 1-3/4″ 9/32″ 14.5
6TB60 Q1 5.6″ 6.0″ 6.35″ 13 5-1/32″ 2-1/2″ 0 2-1/4″ 4-1/8″ 4-3/4″ 3/4″ 1-3/4″ 9/32″ 15.4
6TB62 Q1 5.8″ 6.2″ 6.55″ 13 5-1/32″ 2-1/2″ 0 2-1/4″ 4-1/8″ 4-3/4″ 3/4″ 1-3/4″ 9/32″ 16.4
6TB64 Q1 6.0″ 6.4″ 6.75″ 13 5-1/32″ 2-1/2″ 0 2-1/4″ 4-1/8″ 4-3/4″ 3/4″ 1-3/4″ 9/32″ 18.6
6TB66 Q1 6.2″ 6.6″ 6.95″ 13 5-1/32″ 2-1/2″ 0 2-1/4″ 4-1/8″ 4-3/4″ 3/4″ 1-3/4″ 9/32″ 18.5
6TB68 Q1 6.4″ 6.8″ 7.15″ 13 5-1/32″ 2-1/2″ 0 2-1/4″ 4-1/8″ 4-3/4″ 3/4″ 1-3/4″ 9/32″ 20.8
6TB70 Q2 6.6″ 7.0″ 7.35″ 13 4-25/32″ 3-1/2″ 1/4″ 1″ 4-1/8″ 4-3/4″ 3/4″ 2-3/4″ 9/32″ 22.8
6TB74 Q2 7.0″ 7.4″ 7.75″ 13 4-25/32″ 3-1/2″ 1/4″ 1″ 4-1/8″ 4-3/4″ 3/4″ 2-3/4″ 9/32″ 26.5
6TB80 Q2 7.6″ 8.0″ 8.35″ 13 4-25/32″ 3-1/2″ 1/4″ 1″ 4-1/8″ 4-3/4″ 3/4″ 2-3/4″ 9/32″ 24.1
6TB86 Q2 8.2″ 8.6″ 8.95″ 13 4-25/32″ 3-1/2″ 1/4″ 1″ 4-1/8″ 4-3/4″ 3/4″ 2-3/4″ 9/32″ 27.1
6TB90 Q2 8.6″ 9.0″ 9.35″ 13 4-25/32″ 3-1/2″ 1/4″ 1″ 4-1/8″ 4-3/4″ 3/4″ 2-3/4″ 9/32″ 30.6
6TB94 Q2 9.0″ 9.4″ 9.75″ 13 4-25/32″ 3-1/2″ 1/4″ 1″ 4-1/8″ 4-3/4″ 3/4″ 2-3/4″ 9/32″ 32.8
6TB110 Q2 10.6″ 11.0″ 11.35″ 13 4-25/32″ 3-1/2″ 1/4″ 1″ 4-1/8″ 4-3/4″ 3/4″ 2-3/4″ 9/32″ 36.6
6TB124 Q2 12.0″ 12.4″ 12.75″ 13 4-25/32″ 3-1/2″ 1/4″ 1″ 4-1/8″ 4-3/4″ 3/4″ 2-3/4″ 9/32″ 39.8
6TB136 Q2 13.2″ 13.6″ 13.95″ 13 4-25/32″ 3-1/2″ 1/4″ 1″ 4-1/8″ 4-3/4″ 3/4″ 2-3/4″ 9/32″ 44.9
6TB154 Q2 15.0″ 15.4″ 15.75″ 13 4-25/32″ 3-1/2″ 1/4″ 1″ 4-1/8″ 4-3/4″ 3/4″ 2-3/4″ 9/32″ 49.9
6TB160 Q2 15.6″ 16.0″ 16.35″ 13 4-25/32″ 3-1/2″ 1/4″ 1″ 4-1/8″ 4-3/4″ 3/4″ 2-3/4″ 9/32″ 54.0
6TB184 Q2 18.0″ 18.4″ 18.75″ 13 4-25/32″ 3-1/2″ 1/4″ 1″ 4-1/8″ 4-3/4″ 3/4″ 2-3/4″ 9/32″ 62.0
6TB200 Q2 19.5″ 20.0″ 20.35″ 13 4-25/32″ 3-1/2″ 1/4″ 1″ 4-1/8″ 4-3/4″ 3/4″ 2-3/4″ 9/32″ 74.0
6TB250 Q2 24.5″ 25.0″ 25.35″ 13 4-25/32″ 3-1/2″ 1/4″ 1″ 4-1/8″ 4-3/4″ 3/4″ 2-3/4″ 9/32″ 89.5
6TB300 Q2 29.5″ 30.0″ 30.35″ 13 4-25/32″ 3-1/2″ 1/4″ 1″ 4-1/8″ 4-3/4″ 3/4″ 2-3/4″ 9/32″ 128.0
6TB380 Q2 37.5″ 38.0″ 38.35″ 13 4-25/32″ 3-1/2″ 1/4″ 1″ 4-1/8″ 4-3/4″ 3/4″ 2-3/4″ 9/32″ 179.0

6TB series pulleys are manufactured for A, AX, AA, 4L, B, BX, BB, and 5L v-belts, ranging from 3.75″ to 38.35″ in diameter. Depending on the pulley size, they are made to use with P1, P2, Q1, or Q2 taper bushings, which we also stock. Most of our 6TB pulleys are manufactured from a high-strength grade 35 cast iron, are phosphate-coated, and are painted for anti-corrosion. All of them are balanced at the factory for smooth machinery operation.

6TB Style Pulley Size Chart

Types of V-Belt Pulley:

1) European standard:    

a) V-belt pulleys for taper bushings: SPZ, SPA, SPB, SPC,2BKH; up to 10 grooves

b) Adjustable speed V-belt pulleys and variable speed pulleys

c) Flat belt pulleys and conveyor belt pulleys

2) American standard:

a) Sheaves for taper bushings: 3V, 5V, 8V

b) Sheaves for QD bushings: 3V, 5V, 8V

c) Sheaves for split taper bushings: 3V, 5V, 8V

d) Sheaves for 3L, 4L or A, and 5L or B belts: AK, AKH,2AK, 2AKH, BK,  BKH,2BK, 2BKH, 3BK

e) Adjustable sheaves: poly V-pulley, multi-pitch H, L, J, K, and M

Parts can be made according to drawings and samples. OEM service is welcomed

3) Bore: pilot bore, finished bore, taper bore, bore for QD bushing

4) Surface finish: paint, phosphating, zinc plated

5) Material: cast iron, ductile iron, nylon, aluminum

6) Made according to drawings and samples, OEM inquiries welcomed

Competitive Advantage:

With more than 20 years of advanced technology and experience, we will give strong support for the v belt pulley you need. We will quickly understand your need for the product and provide a quick response and good service. Many cases of our products will show you that it is worth your trust.

Under the complete quality control system, our products go through the precise product line and strict testing. We have excellent working flow and standards to ensure stability and products reliable enough for use.

Considering our scale economy, raw material superiority, and client sincerity, our price is competitive. They are good value and more cost-effective than you imagine.

We sincerely hope to establish long and friendly business relations with clients from all over the world. Our goal is not just to provide a product but also a complete solution, including product design, tooling, fabrication, and service, for our customers to achieve their utmost satisfaction.

Applications of 6TB Style Pulley

Products are widely used in the power output of small diesel engines, agricultural vehicles, tractors, automobiles, mining machinery, machining equipment, textile machinery, packaging machinery, lathes, forging machines, some small horsepower motorcycle power transmission, agricultural machinery power transmission, Air compressor, reducer, reducer, generator, etc.

Technological Processing

Company Profile

HZPT is a professional manufacturer of mechanical parts. Our main products are belt pulleys, sprockets, taper sleeves, coupling, and other transmission parts. Its products are mainly exported to Germany, Britain, France, and other European countries, with an annual export value of 18 million U.S. dollars, accounting for more than 65% of the total output. The annual output value reached 200 million yuan.

Our products all adopt international, European, and American advanced industrial standards, use precise and good processing equipment, develop reasonable production technology, apply efficient and flexible management systems, and improve the quality management system to ensure that the product quality is good and the price is affordable.

Our factory adheres to the enterprise concept of “quality: the basis of enterprise survival, integrity: the basis of enterprise development, service: the source of enterprise development, low price: the instrument of enterprise development.” We are always looking forward to the presence of customers at home and abroad, seeking CZPT benefits and joint cause development.

Warehouse Stock

The warehouse covers an area of 5000 square meters and can provide all kinds of standard models A/B/C/Z, with complete quantity and large quantity in stock. Meanwhile, it accepts all sorts of non-standard customization for drawing production. The daily production capacity is 10 tons, and the delivery time is short.

Packaging & Shipping

Experienced Workers Packing Pulleys Carefully, safe wooden cases keep parts from being injured or damaged during sea or air shipment.

Additional information

Types of pulleys and their advantages and disadvantages

There are several types of pulleys. Learn the basic equations of the pulley system. Then learn about the different uses for pulleys. The disadvantages of using pulleys will be covered. Knowing these, you can buy the pulley that suits your needs. Here are some of the best pulley types and their pros and cons.
pulley

Basic equations of pulley systems

A pulley system is a mechanism that allows 2 blocks of a certain mass to be connected by a taut rope. The acceleration of each block is the same in magnitude and direction. The external force acting on each block is the weight of the block (10g) and the 10sion in the string. The 10sion between the 2 blocks is the total 10sion and the force acting on the pulley is the weight of the 2 blocks.
This simple mechanism uses 2 simple equations to explain how the system works. First, the mass of the weight on both sides of the pulley must be the same. When the weight is forced to move, the rope tightens and the second pulley descends. The weight is also attached to the second pulley and must be the same distance as the first pulley. This will result in a speed ratio of 2 times the distance covered by the first pulley.
Second, we have to calculate the force required to lift the object. The lower mass is supported by a wire configuration passing through all pulleys, while the uppermost pulley is used to apply the force. The lower block is used to support the weight. The applied force needs to travel a distance nx to move the weight. This distance, called MA, can be written as:
Once we have gathered the necessary information, we can apply the calculations to the pulley system. We can also use the Mechanical Advantage Calculator to calculate the force on the anchor. To do this, we must apply a force to the load as well as to the pulley itself. Using this equation, we can calculate the force required by the load to lift the load.
pulley

Types of pulleys

There are 3 basic types of pulleys: movable, fixed and compound. Both types of pulleys translate the force applied to them. The ideal mechanical advantage of pulleys is 2. This is because a single movable pulley only doubles the force, whereas a compound pulley doubles or triples the force. This type of pulley is often used with other types of pulleys.
Movable pulls move with the weight of the load, and the force pulling them increases on the lift side. They are often found in utility elevators and construction cranes. These systems are very simple, inexpensive and quiet to use. The force required to lift the object depends on the mechanical advantage of the system. The 2 most common types of pulleys are listed below. Let’s take a closer look at each 1.
V-shaped pulleys are used in vehicles and electric motors. These pulleys require a “V” belt to function properly. Some have multiple “V” grooves to avoid slipping. They are used in heavy duty applications to reduce the risk of power slip. These pulleys also have more than 1 “V” groove. V-belt pulleys are commonly used in vehicles and electric motors.
Composite pulleys are made from more than 1 type of cable or rope wrapped around the wheel. They can be fixed or hinged and are usually made of stainless steel or bronze. Composite pulleys have multiple layers and can be a single unit or many different components. There are 3 main types of pulleys: fixed pulleys and composite pulleys. These are the most common types. Almost every type of pulley is used for some type of application.
Fixed pulleys have 1 advantage over movable pulleys: they change direction as the weight of the load increases. They are typically used in heavy construction equipment. Gun tackles, patio tackles, and stationary tackles are examples of equipment that use a pulley mechanism. These devices are very common and can be found on most modern construction sites. They provide great convenience for lifting large loads.

application

What are the applications of pulleys? Simply put, a pulley is a mechanical device that transforms a difficult task into an easier 1. It consists of ropes and pulleys. It is usually used to lift objects. Usually, people wrap a rope around a pulley and pull up to lift the object. One disadvantage of using pulleys is that they require the same force as lifting the object directly.
One of the most popular applications of pulleys is lifting heavy objects. They help people pull up heavy objects and blocks. The system can also be used in seeders, lifts, grinders, etc. Other applications include raising flags, loading cargo, pulling curtains and rock or mountain climbing. Students can learn about the various uses of pulleys and the physics behind them.
Pulleys can be made of many different materials, depending on the application. Some are movable, which means they move with the object they are used to lift. This pulley system can be made of nylon, wire rope or fiber material. The best part about these systems is that they are easy to install and maintain. For a better grasp, use the guide or video tutorial to learn more about the pulley system and how it works.
Tapered pulleys are common in paper mills. They are high-quality pulleys that transmit power to connected parts. They can be dynamic or static and have different balances. Because pulley systems are highly customized, most industrial applications require systems designed specifically for specific applications. In this way, the system is safe, simple and inexpensive. The benefits of this design are endless.
The most common use of pulleys is for motor drives. They are used to minimize noise by applying force to the shaft to reduce the workload. They are also less expensive than gears and do not require lubrication. Furthermore, they can change the direction of the applied force. They are also less expensive than gears and are often used with other components. A screw is a cylindrical member with helical ribs used to connect something.
pulley

shortcoming

Although the pulley system makes it easier to move heavy objects, it still has some drawbacks. When using a pulley system, you must remember that the force required to lift the weight increases with the number of cycles. In addition, the distance between the puller and the heavy object increases, which may lead to accidents. Also, moving heavy objects can be tricky if the rope slips. Pulley systems are not very expensive and can be easily assembled. However, it does require a lot of space.
First, it is not efficient. Besides being inefficient, pulleys produce different forces at different speeds. Fixed pulleys use more force than the load, while movable pulleys move with the load. A movable pulley requires less force than a fixed pulley, but the combined system travels a long distance. Therefore, this method is not as efficient as the fixed method.
Pulleys are not only used in industrial processes. You can see them in various places in your daily life. For example, large construction cranes use pulleys to lift heavy loads. Even flagpoles, blinds, clotheslines, ziplines, motors and climbing equipment use pulleys. Still, despite their advantages, the disadvantages are not too serious.
Another disadvantage of the pulley is its wear and tear. While a pulley’s housing is theoretically infinite, its bearings and locking components typically wear out over time. To overcome this problem, a new bearing and locking assembly can be installed. No need to replace the housing and shaft, the entire assembly can be re-bonded and painted to replicate the original look. Alternatively, the pulley can be replaced with a new housing and shaft.
Using pulleys can also reduce the advantage of pulleys. On the other hand, interception and tackle is a system in which 2 pulleys are connected to each other using ropes. Unlike pulleys, pulley pulley systems can be adjusted in the direction of travel and can move heavy loads up to 4 times their force when used in hydraulic lifts.

SPA Pulleys

As one of leading spa pulleys manufacturers, suppliers and exporters of products, We offer spa pulleys and many other products.

Please contact us for details.

Mail:[email protected]

Manufacturer supplier exporter of spa pulleys

Recent Posts